Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Using the Scan Tool<br />
VIEWING ENHANCED DTCs<br />
� To view additional enhanced DTCs, repeat steps 1 through 4,<br />
above.<br />
� To exit the enhanced mode, press the LD/M<br />
Scan Tool returns to the OBD2 DTC screen.<br />
button. The<br />
Honda/Acura Enhanced DTCs<br />
When the Scan Tool enters the “enhanced”<br />
mode (and Honda/Acura is selected, if<br />
prompted), the Honda Acura Enhanced menu<br />
displays. Depending on the protocol used to<br />
communicate with your vehicle, the<br />
Honda/Acura<br />
options to view:<br />
Enhanced menu provides<br />
� Confirmed DTCs or Temporary DTCs<br />
� Confirmed DTCs or Pending DTCs<br />
1. Use the UP and DOWN buttons,<br />
as necessary, to highlight the desired<br />
option, then press the ENTER button.<br />
� A “One moment please” message<br />
displays while the Scan Tool<br />
retrieves the selected DTCs.<br />
� If the Scan Tool fails to link to the<br />
vehicle’s computer, a “Linking<br />
Failed” message shows on the Scan<br />
Tool’s display.<br />
- Verify the ignition is ON, then<br />
press the ENTER<br />
continue.<br />
2. To read the display:<br />
button to<br />
Refer to DISPLAY FUNCTIONS on page 8 for a description of<br />
LCD display elements.<br />
� A visible icon indicates that the Scan Tool is being powered<br />
�<br />
through the vehicle’s DLC connector.<br />
The upper right hand corner of the<br />
display shows the number of the<br />
code currently being displayed, the<br />
total number of codes retrieved.<br />
� The Diagnostic Trouble Code (DTC)<br />
and related code definition are<br />
shown in the lower section of the<br />
LCD display.<br />
I/M MONITOR STATUS icons are not displayed when<br />
viewing enhanced DTCs.<br />
OBD2&1 45
Change language