The ferrotype and how to make it - The Grian Press

THE KNICKERBOCKER STAND.
The Acme Top.
Each stand is packed in a
separate box. The tops are
attached to the upright
with screws, in metallic
ears, and the legs are firmlyfastened
with screws to the
center-piece, and are removed
when packed. The
tops of Nos. I, 2, 3 and 4 are
elevated by means of a
snake screw operating on a
cog-wheel, and this in turn
on the metallic rack of the
standard or upright. This
peculiar arrangement
greatly diminishes the friction
; and therefore very
little power suffices in
elevating or lowering the
camera. The tops of Nos.
o and I
means of
are inclined by
a cam operated
by a snake screw, while
that of No. 4 is after Stoddard's
pattern. We annex
^a cut of No. 4 entire. Nos.
2 and 3 have the Acme top.
WITH KNICKERBOCKER TOP.
WITH ACME TOP.
No. o, for 4-4 Camera $7 00 No. 2, for 8 X 10 Camera.. $9
" I, " " ..12
.... 8 75
3.
No. 4, for 8 X 10 Camera, with Stoddard top $15 00
50
00
MANUFACTURED BY
THE ANTHONY & SCOVE.L COMPANY,
NEW YORK.