CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The caps are then veneered and attached with suitable plastic in the usual<br />
manner.<br />
INSERTION OF THE PROSTHETIC RESTORATION<br />
The finished plastic bridge is transferred to the CONELOG ® Vario SR abutments<br />
and fixed using the new unused Vario SR prosthetic screws. The tightening<br />
torque is 15 Ncm.<br />
For hygiene and esthetic reasons, we recommend closing the transocclusal<br />
screw opening. To ensure that the Vario SR prosthetic screw can be removed<br />
again, the screw head is covered with some wax or gutta-percha and the<br />
screw channel closed with e.g. composite.<br />
Clean and disinfect the prosthetic components prior to insertion. We recommend<br />
component sterilization (see also the «Preparation Instructions for<br />
the CAMLOG ® /CONELOG ® <strong>Implant</strong> <strong>System</strong>», Art. No. J8000.0032). The<br />
peri-implant hard and soft tissue situation must allow gapless insertion of<br />
the restoration.<br />
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
101
Change language