CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
CONELOG ®<br />
LOCATOR ® ABUTMENT<br />
The titanium housing is polymerized with suitable self-curing polymer in<br />
accordance with the manufacturer's instructions. We recommend wetting<br />
the titanium housing with acrylic. The denture is then inserted, the exact fit<br />
checked and the perforations filled with acrylic. After the acrylic has cured,<br />
the denture is removed from the mouth, acrylic overages removed and polished.<br />
After trimming and polishing, the black processing replacement males are<br />
removed and replaced by corresponding colored replacement males as<br />
described in «Integration of the colored replacement males» on page 141.<br />
The finished prosthesis is inserted and the occlusion checked.<br />
144<br />
EXCHANGE OF THE REPLACEMENT MALES<br />
IN AN EXISTING FULL DENTURE<br />
The Locator ® instrument is used to exchange the replacement males if<br />
needed. The screw-on tip is turned three rotations counter-clockwise. Press<br />
the retentive tip into the replacement male and remove the male.<br />
The middle piece of the Locator ® instrument is used to integrate the colored<br />
replacement male in the empty titanium housing. The tip of the instrument<br />
is unscrewed, the replacement male positioned and pressed into the titanium<br />
housing.<br />
NOTE<br />
The replacement males have no friction on the middle piece. Therefore,<br />
keep the middle piece perpendicular and press in the replacement male<br />
from the basal view.<br />
See also «Integration of the colored replacement males» on page 141.
Change language