CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
CONELOG ® ESTHOMIC ®<br />
LINE OF ABUTMENTS<br />
FABRICATING A MILLING CAST:<br />
To transfer the cast situation to an individually fabricated milling base,<br />
CONELOG ® impression posts, open tray and CONELOG ® lab analogs corresponding<br />
to the implant diameter are required (see color-coding). The impression<br />
posts are mounted to the lab analogs in the cast. Note the proper<br />
seating.<br />
The posts are firmly attached with a transfer assistance with cold-curing<br />
plastic in the retentive area (NOT on the fixing screw). After the plastic has<br />
cured, loosening and completely backing out the fixing screw, the transfer<br />
assistance with the CONELOG ® impression posts is removed from the cast.<br />
46<br />
The CONELOG ® impression posts are bolted together with the appropriate<br />
CONELOG ® lab analogs and inserted in a milling disk filled with super-hard<br />
dental stone.<br />
The uniform insertion direction previously determined on the master cast<br />
represents the milling axis.