CONELOG® Implant System Prosthetic Restorations - Camlog

CONELOG ® IMPLANT SYSTEM
PROSTHETIC RESTORATIONS
CONELOG ® UNIVERSAL
AND TELESCOPE ABUTMENT
CONELOG ® TELESCOPE ABUTMENT
The CONELOG ® telescope abutment can be used for the fabrication of double
crowns (cone/telescope). The abutment is made of a titanium alloy and
can be custom trimmed. The abutment has an occlusally widened cone angle
of 5° to offset large angulation corrections in the case of disparallelplaced
implants. The CONELOG ® telescope abutment is color-coded according
to the diameter of the implant and includes a CONELOG ® abutment
screw.
INDIVIDUAL PROCESSING/PREPARATION OF THE CONELOG ®
UNIVERSAL AND TELESCOPE ABUTMENT
After selecting the suitable CONELOG ® universal or telescope abutment for
the planned prosthetic restoration, it is individually modified in consideration
of the anatomical conditions. To prepare the abutment and to fabricate
the superstructure on the plaster cast, the brown anodized CONELOG ®
lab screw should be used.
For milling the abutments for a double crown restoration, we recommend
fabrication of a milling cast, see pages 61 and 62. Preparation, manufacture
of a crown or bridge restoration and insertion are similar to the abutments
of the CONELOG ® Esthomic ® line of abutments as described on pages 40–47.
68
Prosthetic height
CONELOG ® Abutment screw
CONELOG ® TELESCOPE ABUTMENT, preparable, incl. CONELOG ® Abutment screw, (Ti6Al4V)
ART. NO. C2212.3800 C2212.4300 C2212.5000
Implant Ø mm 3.8 4.3 5.0
PH mm 12.0 12.0 12.0
PH: Prosthetic height (measured from the implant shoulder surface to occlusal abutment edge
with the CONELOG ® abutment screwed into the CONELOG ® implant)
CONELOG ® ART. NO.
Lab screw, hex,
brown anodized
C4006.1601 C4006.2001
Implant Ø mm 3.3/3.8/4.3 5.0
Thread M 1.6 M 2.0