CONELOG® Implant System Prosthetic Restorations - Camlog

CONELOG ® UNIVERSAL
AND TELESCOPE ABUTMENT
CONELOG ® UNIVERSAL ABUTMENT
The CONELOG ® universal abutment can be used for individually fabricated
cementable crown and bridge restorations as well as double crown restorations.
The abutment is made of a titanium alloy and can be custom
trimmed. Divergences of max. 20° to the implant axis can be compensated
for by a suitably adapted forming and bridge restorations inserted.
The CONELOG ® universal abutment is color-coded according to the diameter
of the implant and includes a CONELOG ® abutment screw.
The prosthetic height (PH) is the distance between the implant shoulder surface
up to the occlusal abutment edge of the CONELOG ® abutment screwed
into the CONELOG ® implant.
IMPORTANT NOTE
The CONELOG ® universal abutment with Ø 3.3 mm is not suitable for
double crown restorations due to stability reasons.
Prosthetic height
CONELOG ® Abutment screw
CONELOG ® IMPLANT SYSTEM
PROSTHETIC RESTORATIONS
CONELOG ® UNIVERSAL ABUTMENT, preparable, incl. CONELOG ® Abutment screw, (Ti6Al4V)
ART. NO. C2211.3300* C2211.3800 C2211.4300 C2211.5000
Implant Ø mm 3.3 3.8 4.3 5.0
PH mm 11.0 11.0 11.0 11.0
PH: Prosthetic height (measured from the implant shoulder surface to occlusal abutment edge
with the CONELOG ® abutment screwed into the CONELOG ® implant)
*Only for crown restorations in the region of the upper lateral and lower lateral and central
incisors
67