CONELOG® Implant System Prosthetic Restorations - Camlog

CONELOG ® ESTHOMIC ®
SELECTION ABUTMENT KIT
After fabricating the master cast, the CONELOG ® Esthomic ® abutments
suitable for the superstructures can be quickly and easily selected using the
color-coded CONELOG ® Esthomic ® selection abutments in the dental laboratory.
There is no longer any need for expensive and complicated storage
of the original abutments, either by the dentist or at the prosthodontist or
dental laboratory.
The CONELOG ® Esthomic ® selection abutments are identical in geometry
to the original CONELOG ® Esthomic ® abutments. The CONELOG ® Esthomic ®
selection abutments are made of plastic, have only one cam and are fully
pigmented. CONELOG ® Esthomic ® selection abutments are available in the
CONELOG ® Esthomic ® Selection Abutment Kit (contains 2 units each).
The appropriate abutments are selected on the master cast. The implant
axis, groove position, gingival line/thickness and implant diameter are
taken into account. The CONELOG ® Esthomic ® selection abutments can be
inserted directly into the CONELOG ® lab analog and are reusable.
CAUTION!
CONELOG ® Esthomic ® selection abutments must not be used on the
patient!
CONELOG ® Esthomic ® Selection abutments
Straight 15° and 20° angled as type A and B
CONELOG ® IMPLANT SYSTEM
PROSTHETIC RESTORATIONS
CONELOG ® Esthomic Selection Abutment Kit, content (2 units each):
CONELOG ® Esthomic Selection abutments, straight
CONELOG ® Esthomic Selection abutments, 15° angled, type A
CONELOG ® Esthomic Selection abutments, 15° angled, type B
CONELOG ® Esthomic Selection abutments, 20° angled, type A
CONELOG ® ART. NO. ARTICLE MATERIAL
C8011.1000
Esthomic Selection abutments, 20° angled, type B
POM
39