CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
IMPRESSION-TAKING FOR VARIO SR SINGLE<br />
CROWN FABRICATION<br />
To fabricate single crown restorations on CONELOG ® Vario SR abutments,<br />
the impression is taken in the CONELOG ® implant directly with a colorcoded<br />
CONELOG ® impression post, open or closed tray. The groove<br />
orientation is also transferred over. The impression posts are equipped<br />
with a fixing screw that is tightened by hand on the implant using a screwdriver<br />
(hex).<br />
CONELOG ® IMPRESSION POSTS, OPEN TRAY<br />
ART. NO. C2121.3800 C2121.4300 C2121.5000<br />
PH mm 10.0 10.0 10.0<br />
CONELOG ® IMPRESSION POST, CLOSED TRAY,<br />
incl. impression cap and bite registration cap<br />
ART. NO. C2110.3800 C2110.4300 C2110.5000<br />
PH mm 10.7 10.7 10.7<br />
PH: <strong>Prosthetic</strong> height<br />
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
NOTE<br />
Taking the impression directly in the CONELOG ® implant using a<br />
CONELOG ® impression post, open and/or closed tray, requires that the<br />
cast be fabricated using a CONELOG ® lab analog of the same color.<br />
85