CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
CONELOG ®<br />
BAR ABUTMENT<br />
The impression posts are then reattached with the driver for impression<br />
posts and healing caps for CONELOG ® bar abutments and unscrewed from<br />
the bar abutment.<br />
The bar abutments remain in the implants. The impression posts are handed<br />
over to the dental laboratory.<br />
The screwdriver (hex) is then used to screw healing caps for bar abutments<br />
onto the bar abutments based on the implant diameters used. The healing<br />
cap for bar abutment protects the bar abutment and at the same time<br />
assumes the function of a healing cap.<br />
Healing cap for CONELOG ® ART. NO. ARTICLE MATERIAL<br />
C2030.4300<br />
bar abutment,<br />
Titanium<br />
for Ø 3.3/3.8/4.3/5.0 mm<br />
alloy<br />
CAST FABRICATION<br />
In the dental laboratory, the impression posts for bar abutments are tightened<br />
by hand to the bar lab analogs/soldering aids and repositioned in the<br />
impression.<br />
108<br />
Impression post for bar abutment<br />
with bar lab analog/soldering aid<br />
Bar lab analog/soldering aid for CONELOG ® ART. NO. ARTICLE MATERIAL<br />
C3020.4300<br />
bar abutments,<br />
Titanium<br />
for Ø 3.3/3.8/4.3/5.0 mm<br />
alloy
Change language