CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARIO SR PROSTHETIC COMPONENTS<br />
To fabricate occlusally screw-retained restorations, various Vario SR<br />
prosthetic components are available that are attached to the CONELOG ®<br />
Vario SR abutments and Vario SR analogs using the Vario SR prosthetic<br />
screw (M 2.0).<br />
SYSTEM OVERVIEW OF VARIO SR PROSTHETIC COMPONENTS<br />
IMPRESSION TAKING<br />
Vario SR impression caps<br />
open and closed tray, without antirotational<br />
mechanism, for impression<br />
taking for bar and bridge restorations<br />
Vario SR impression cap, open tray<br />
Ø 3.8/4.3 and 5.0 mm<br />
PH<br />
CAST FABRICATION<br />
Vario SR analogs,<br />
for cast fabrication for bar and bridge<br />
restorations<br />
10.0 mm 11.0 mm<br />
TEMPORARY RESTORATION<br />
Vario SR protection caps,<br />
for initial temporary restoration of the<br />
CONELOG ® Vario SR abutments<br />
PH<br />
FABRICATION OF THE SUPERSTRUCTURE<br />
Vario SR prosthetic screw,<br />
hex, M 2.0, yellow anodized<br />
6.0 mm 6.0 mm<br />
Vario SR prosthetic screw for all Vario SR caps and Ø<br />
Vario SR plastic copings,<br />
burn-out, for single crowns with antirotational<br />
mechanism, for bridge<br />
constructions and cast bar constructions<br />
without antirotational mechanism<br />
PH<br />
Vario SR titanium caps,<br />
bridges, without antirotational<br />
mechanism, for temporary restorations<br />
and/or final bridge restorations<br />
11.0 mm 11.0 mm<br />
PH 11.0 mm 11.0 mm<br />
Vario SR bases for bars,<br />
made of titanium, for fabrication of<br />
laser-welded titanium bar constructions,<br />
without antirotational mechanism<br />
Vario SR analog<br />
Ø 3.8/4.3 mm<br />
Vario SR protection cap<br />
Ø 3.8/4.3 mm<br />
Vario SR plastic copings, crown or bridge<br />
Ø 3.8/4.3 mm<br />
Vario SR titanium cap, bridge<br />
Ø 3.8/4.3 mm<br />
Vario SR base for bar<br />
Ø 3.8/4.3 mm<br />
PH 6.0 mm 6.0 mm<br />
Vario SR caps, copings and analogs are each available for diameters 3.8/4.3 mm<br />
and 5.0 mm.<br />
PH: <strong>Prosthetic</strong> height<br />
Vario SR impression cap, closed tray<br />
Ø 3.8/4.3 and 5.0 mm<br />
Vario SR analog<br />
Ø 5.0 mm<br />
Vario SR protection cap<br />
Ø 5.0 mm<br />
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
Vario SR plastic copings, crown or bridge<br />
Ø 5.0 mm<br />
Vario SR titanium cap, bridge<br />
Ø 5.0 mm<br />
Vario SR base for bar<br />
Ø 5.0 mm<br />
79