CONELOG® Implant System Prosthetic Restorations - Camlog

CONELOG ® IMPLANT SYSTEM
PROSTHETIC RESTORATIONS
CONELOG ® ESTHOMIC ®
LINE OF ABUTMENTS
To protect the CONELOG ® abutment screw when fabricating the prosthetic
restoration, we recommend using a CONELOG ® lab screw with the corresponding
diameter.
40
IMPORTANT NOTE
The CONELOG ® lab screws must not be used on the patient!
PROCESSING THE CONELOG ®
ESTHOMIC ® ABUTMENT
INDIVIDUAL PROCESSING/PREPARATION
(EXAMPLE: CEMENTED SINGLE CROWN)
After selecting the suitable CONELOG ® Esthomic ® abutment, it is individually
modified in consideration of the anatomical conditions.
To prepare the abutment and to fabricate the superstructure on the plaster
cast, the brown anodized CONELOG ® lab screw should be used.
The silicone index prepared in the planning phase is used on the plaster cast
for visualization of the desired prosthetic design and as support for achieving
the optimal forming of the CONELOG ® abutment.
CONELOG ® ART. NO.
Lab screw, hex,
brown anodized
C4006.1601 C4006.2001
Implant Ø mm 3.3/3.8/4.3 5.0
Thread M 1.6 M 2.0
The course of the preparation edge, as well as the height and axial alignment
are marked.
To simplify processing the CONELOG ® abutment, the universal holder can
be used with diameter-matched, color-coded CONELOG ® abutment collets.
The integrated clamping screw (hex) fixes the required insert (abutment collect)
in the handle and the lab screw secures the abutment in the insert.
CONELOG ®
Lab screw
Clamping screw,
hex