CONELOG® Implant System Prosthetic Restorations - Camlog

CONELOG ® IMPLANT SYSTEM
PROSTHETIC RESTORATIONS
CONELOG ®
IMPRESSION TAKING
IMPRESSION TAKING OF CONELOG ® IMPLANTS
INTRODUCTION
The CONELOG ® impression taking components provide a highly precise,
rotation-resistant transfer system for both closed and open tray impression
methods. The CONELOG ® impression posts do not lock into the cone
of the CONELOG ® implants, but lie on the implant shoulder. A vertical
offset is prevented when taking the impression. The antirotational mechanism
is ensured by the CONELOG ® groove/cam connection.
All system components are color-coded by implant diameter. You should
make sure to apply only implants and impression components of the
same diameter (by color-coding). No components of different diameters
should be joined to one another. The system components must not be
modified.
IMPRESSION METHODS, OPEN AND CLOSED TRAY
The open or closed tray method may be selected for impression taking.
If heavily divergent implant axes are present or combination with a functional
impression-taking is desired, the open tray impression-taking
method should be used.
IMPRESSION MATERIAL
Silicone or polyether materials can be used as impression-taking materials
for the open and closed tray impression-taking methods.
18
NOTE
The impression-taking of CONELOG ® SCREW-LINE implants is only possible
with CONELOG ® impression posts, open and/or closed tray.
CONELOG ® Impression posts, open and
closed tray
CONELOG ® CONELOG
Impression posts,
open tray, incl. fixing screw
® IMPRESSION POSTS, OPEN TRAY
ART. NO. C2121.3300 C2121.3800 C2121.4300 C2121.5000
Implant Ø mm 3.3 3.8 4.3 5.0
PH mm 10.0 10.0 10.0 10.0
PH: Prosthetic height