CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OPTIONAL FABRICATION OF THE<br />
SUPERSTRUCTURE DIRECTLY ON CONELOG ®<br />
VARIO SR ABUTMENTS<br />
BROWN ANODIZED LAB SCREWS<br />
The superstructure (bridge or bar) can also be fabricated on the<br />
CONELOG ® Vario SR abutment (straight or angled) directly. However,<br />
fabrication of a single crown restoration requires fabrication on the original<br />
CONELOG ® Vario SR abutments (see also Impression-taking for<br />
Vario SR single crown restoration, page 85).<br />
After fabricating the cast with CONELOG ® lab analogs, the CONELOG ®<br />
Vario SR abutment is set in the CONELOG ® lab analog. In this case, we<br />
recommend the use of a brown anodized CONELOG ® lab screw (hex) for<br />
fixation of the abutment in the CONELOG ® lab analog. The abutment<br />
screw attached to the abutment is only used for final insertion in the implant.<br />
CONELOG ® VARIO SR ABUTMENT OVERVIEW<br />
Straight, 20° und 30° angled<br />
abutments<br />
Lab screws<br />
CAUTION!<br />
Only use the matching lab screw type!<br />
Straight CONELOG ®<br />
Vario SR abutments<br />
Ø 3.8/4.3 mm<br />
CONELOG ® Vario SR<br />
lab screw M 1.6<br />
ART. NO. C4008.1600<br />
Angled CONELOG ®<br />
Vario SR abutments<br />
Ø 3.8/4.3 mm<br />
CONELOG ® Lab screw<br />
M 1.6<br />
ART. NO. C4006.1601<br />
Straight CONELOG ®<br />
Vario SR abutments<br />
Ø 5.0 mm<br />
CONELOG ® Vario SR<br />
lab screw M 2.0<br />
ART. NO. C4008.2000<br />
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
Angled CONELOG ®<br />
Vario SR abutments<br />
Ø 5.0 mm<br />
CONELOG ® Lab screw<br />
M 2.0<br />
ART. NO. C4006.2001<br />
95