CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
CONELOG® Implant System Prosthetic Restorations - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONELOG ® IMPLANT SYSTEM<br />
PROSTHETIC RESTORATIONS<br />
CONELOG ® TEMPORARY<br />
RESTORATION<br />
FABRICATION OF A TEMPORARY<br />
SINGLE-TOOTH RESTORATION<br />
EXAMPLE CHAIR-SIDE<br />
The CONELOG ® temporary abutment is inserted into the CONELOG ® implant<br />
and turned until the cams engage with the grooves of the implant.<br />
Next, the CONELOG ® abutment screw is inserted into the CONELOG ® temporary<br />
abutment and tightened by hand with a screwdriver, hex. The vestibular<br />
center and the desired occlusal height are marked on the abutment.<br />
Inserting the CONELOG ® Temporary abutment<br />
The custom shortening and/or grinding of the CONELOG ® temporary abutment<br />
is performed extraorally in order to prevent contamination of the surrounding<br />
tissue with particles from the grinding. To simplify handling, the<br />
abutment can be screwed onto a CONELOG ® lab analog or onto a CONELOG ®<br />
abutment collect for the universal holder.<br />
To protect the CONELOG ® abutment screw, we recommend using a<br />
CONELOG ® lab screw with matching diameter.<br />
CONELOG ® ART. NO.<br />
Lab screw,<br />
hex, brown anodized<br />
C4006.1601 C4006.2001<br />
<strong>Implant</strong> Ø mm 3.3/3.8/4.3 5.0<br />
Thread M 1.6 M 2.0<br />
34<br />
IMPORTANT NOTE<br />
The CONELOG ® lab screws must not be used on the patient!<br />
CONELOG ® Abutment collect with universal holder<br />
CONELOG ® Screw design