IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

NOTE
User Manual
Operation and Management
The IRD-2900 can support either IP or L-Band receiver modules. The
configuration menu structure changes according to each of these available
module options.
4.2.1. Receiver Modules
The purpose of the receiver module is to single out a selected Transport Stream
from the transmission that reaches the IRD-2900 inputs, to demodulate it, and
pass on the digital transport stream to the decoder module.
Different networks require various receiver types. According to its licensing, the
IRD-2900 supports two types of receivers:
1. Satellite Receiver Modules:
• DVB-S Receiver Module The configuration parameters of the DVB-S
receiver module are detailed in Section 4.2.2.1.
• DVB-S2 Receiver Module The configuration parameters of the
DVB-S2 receiver module are detailed in Section 4.2.2.2.
• DSNG Module The configuration parameters of the DSNG receiver
module are detailed in Section 4.2.2.3.
• ATM Module The configuration parameters of the ATM receiver module
are detailed in Section 4.2.2.4.
2. IP Receiver Module: The configuration parameters of the IP receiver
module are detailed in Section 4.2.2.5.
To access the Receiver Configuration menu using the front panel, select
Configuration����Receiver (independently of the receiver module type).
Page 4-14 (Rev. 4.6/ SW v1.80/ December 2007)