IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

NOTES
User Manual
This model requires a breakout cable to connect to the 3rd and 4th analog
stereo pairs.
Overview
In case of power failure or system shutdown, ASI OUT 1 output will become ASI
loop-through. Use ASI OUT 1 output for cascading a chain of IRD-2900.
1.5.4.9. IRD-2992 Interfaces and Features
The IRD-2992 is a dual 4:2:0 decoder. The IRD-299x family consists of three
composite video interfaces. The CVBS #1 is for service broadcast video quality.
The CVBS #2 is for service monitoring and OSD video quality. The CVBS #3 is
for additional service broadcast video quality.
Figure 1-15 illustrates the IRD-2992 rear panel. The IRD-2992 basic features
and software-licensed features are also detailed.
Figure 1-15: IRD-2992 Rear Panel
Basic Features
• 3 composite video interfaces (2 for
broadcast, 1 for monitoring)
• 2 SDI interfaces
• Embedded VBI and up to 4 stereo
channels in SDI
• 4 active analog-audio-stereo
balanced interfaces
• 4 active AES/EBU-SPDIF audio
balanced interfaces
• SNMP management (10/100 Bas-
T)
• Web-based management (10/100
• GPI
Base-T)
Software-Licensed Features
• ASI input
• Dual (identical) ASI output
• MPEG-over-IP output or IP data
output (MPE de-capsulation)
• Genlock input and loop-through
output
• Dolby Digital (AC-3) LT/RT
downmixing
• Linear PCM (SMPTE 302M 2000),
Dolby-E pass-through
• Pro MPEG FEC
• H.264 (One program only)
• PID and service filtering
• RS-232 low speed data output
• DVB-S2 Advance Modulation
(optional)
Page 1-16 (Rev. 4.6/ SW v1.80/ December 2007)