IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
When selecting a Service listed at the Select from Service table menu, a list
of all available PIDs of the selected services is displayed, and the user can
select specific PIDs.
For example:
000A
000A
1 ���� SELECT SELECT ALL
ALL
2 ���� REMOVE REMOVE ALL
ALL
3 ���� 0100 0100-PMT
0100 PMT
4 ���� 0101 101 101-PCR 101 PCR
The selected service's ID is displayed at the title. The first two parameters of
every service list are:
• SELECT ALL – Select all PIDs of the current service.
• REMOVE ALL – Remove all PID's of the current service.
The rest of the list includes available PIDs next to the PID' type.
• ADD - This parameter allows the user to manually add PIDs by using the keypad
and enter the PID symbol [Hex]. The available values range is 0000 to 1FFF
[Hex].
• Remove - This parameter allows the user to manually remove PIDs from
being filtered by using the keypad and enter the PID symbol [Hex]. The
available values range is 0000 to 1FFF [Hex].
• Selected List - This screen displays all selected PIDs, For example: 010A.
• Clear All - This parameter allows clearing all selected PIDs-to-filter list. The
available options are:
• OFF – clear list disabled.
• ON – active clear list.
NOTE
PID menu is applicable only when service filtering is selected from the Strategy
menu.
Scopus Documents (p/n 100793) Page 4-71