IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

FOR NORTH AMERICAN
User Manual
Installation
power connection, select a power supply cord that is UL Listed and CSA
Certified 3 - conductor, [18 AWG], terminated in a molded on plug cap rated
125 V, [15 A], with a minimum length of 1.5m [six feet] but no longer than
4.5m...For European connection, select a power supply cord that is
internationally harmonized and marked "", 3 - conductor, 0,75 mm2
minimum mm2 wire, rated 300 V, with a PVC insulated jacket. The cord must
have a molded on plug cap rated 250 V, 10 A...".
2.2. INVENTORY CHECK
CAUTION
IF ANYTHING IS MISSING OR DAMAGED, DO NOT CONTINUE WITH THE INSTALLATION. SEE THE
PROCEDURES IN THE FRONT OF THIS MANUAL FOR SCOPUS SUPPORT INFORMATION.
Before installing the unit, ensure that all the equipment has arrived and check
for damage according to the following list:
ITEM QUANTITY
IRD-2900 Professional Integrated Receiver Decoder 1
Power cable 1
User manual, IRD-2900 Professional Integrated Receiver Decoder 1
Breakout cable if applicable 1/2
2.3. INSTALLATION INSTRUCTIONS
This section explains the mechanical installation of the rack and IRD-2900
device.
2.3.1. Site Preparation
When installing the IRD-2900 in a standard 19" rack, verify that the rack is fully
prepared for the installation. To facilitate easy access during installation and
maintenance, leave sufficient space behind the rack.
Page 2-2 (Rev. 4.6/ SW v1.80/ December 2007)