IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

The following describe managing the Trap Destination:
To add a new Trap Destination:
User Manual
Operation and Management
1. Access the Traps tab. From the web-interface, go to: Unit����Traps.
2. In the Trap Table, type valid values for the IP Address, Port, Description
(optional) and Community String (optional) parameters. For example see
Figure 4-52.
Figure 4-52: Add New Trap Destination
3. Click ADD.
To drop a Trap Destination:
1. Access the Traps tab. From the web-interface, go to: Unit����Traps.
2. Click the Delete button located right to the trap entry. For example see
Figure 4-53.
Figure 4-53: Delete Trap Destination
To modify a Trap Destination:
1. Access the Traps tab. From the web-interface, go to: Unit����Traps.
2. Change the Trap entry parameters.
2. Click the Apply button located right to the trap entry. For example see
Figure 4-54.
Figure 4-54: Modify Trap Destination
Page 4-170 (Rev. 4.6/ SW v1.80/ December 2007)