IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
4.2.5.4. PID Select
This option is intended for advanced users only and should not be used
normally.
Create a Service only through Configuration����Service����TV1/TV2 Select.
The PID Select menu allows the operator to directly assign an ES to an output
port directly, without attaching it to a Service. This option can be useful when
the PMT is not available or is defective.
Before assigning the ES to an output, the operator verifies that the new PID
entered is correct.
CAUTION
USING THIS CONTROL MENU DISASSOCIATES THE SELECTED ELEMENTRY STREAM FROM ANY
SERVICE AND MAKE IT A STAND ALONE STREAM WITH NO ATTATCH SYNCHRONIZATION AND NO
OTHER ASSOCIATED SIGNAL MAY COUSE VIDEO AND AUDIO ISSUES IF NOT HANDLES CORRECTLY.
IT IS HIGHLY RECOMMENDED TO CONSULT SCOPUS CUSTOMER SUPPORT BEFORE USING THIS
CONTROL MENU.
To access the PID Select Menu in the front panel control interface go to
Configuration����Service����PID Select.
Scopus Documents (p/n 100793) Page 4-83