IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
05 05 ASI Mode Burst
Burst
The Source parameter defines the input stream source.
SOURCE
When the receiver is active in the IRD, the following menu is displayed:
Source
Source
1���� FRONT FRONT-END FRONT END END (QPSK)
(QPSK)
2���� ASI
ASI
3���� SERIAL SERIAL RS RS-422 RS
422
4���� None
None
NOTE
The Decoder Stream Source screen is dynamic and it changes according to the
currently-active IRD-2900 interface.
The available options are:
• FRONT-END (if applicable) – Selects the Receiver Front-End Interface as
the source for the input transport stream
• ASI – Select the ASI digital input as the source for the input transport
stream
• SERIAL RS-422 – Selects the RS-422 serial input as the source for the
NOTE
input transport stream
Only qualified personnel should handle serial RS-422 option.
• None - No input source is selected for the IRD-2900.
NOTE
When Front-End (IP) is selected, the 27 MHz Synchronization option must
be set to Fixed-Value (see next page).
Scopus Documents (p/n 100793) Page 4-57