IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

User Manual
Operation and Management
• Remove - This parameter allow the user to manually remove by using the
keypad and enter the service' ID. The available values range is 0000 to
FFFF [Hex].
• Selected List - This screen displays all selected services' ID symbols. For
example: 010A.
• Clear All – This parameter allows clearing all selected services list. The
available options are:
• OFF – clear list disabled.
• ON – active clear list.
NOTE
Service menu is applicable only when service filtering is selected from the
Strategy menu
SELECT SERVICES THROUGH THE WEB INTERFACE
Select Services is the corresponding web-management screen that allows the
user to select Services for the filtering mode.
Figure 4-20 displays the corresponding Select Services Parameters (Web
Management screen).
Figure 4-20: Select Service Menu Screen
Page 4-68 (Rev. 4.6/ SW v1.80/ December 2007)