IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
Figure 2-2 illustrates the exact measurements of Scopus’ special rack-slides.
Figure 2-2: Scopus Rack Slide Measurement Specifications
Fasten the pair of rack slides to the rack’s side rails in the device’s designated
location with four M6 screws (two on each side of the rack) before continuing.
After tightly fastening the supporting rack-slides to the rack, perform the
following steps to install the device within the rack:
1. Lay the device on the rack-slides in its designated location within the rack.
Figure 2-3 is a see-through illustration, demonstrating the placing of the
device on the rack-slides.
Scopus Documents (p/n 100793) Page 2-5