IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
The following screen displays the Service configuration menu:
Service Service
1 TV1 TV1 Select
Select
2 TV2 TV2 Select
Select
3 Stand Stand-Alone Stand Alone Alone Select
4 Preferred Preferred Preferred Language
Language
1-2-3 3
5 PID PID Select
Select
6 Mapping Mapping Port Port to to Service
Service
7 General General Configuration
Configuration+
Configuration
Configuration
The Service Configuration menu parameters are as follows:
• TV1 and TV2 Select (if applicable)
Enables assign a service from the incoming TS to a decoder. In the case of a
dual decoder, a user can assign two services from the incoming TS, one for
each decoder (see Section 4.2.5.1).
• Stand-Alone
This feature will be supported in the future software releases.
• Preferred Language
This group contains parameters that define the preferred language (see
Section 4.2.5.3).
• PID Select
This group contains parameters that define the PID components in the
elementary stream (see Section 4.2.5.4).
• Mapping Port to Service
This group contains parameters that define the port mapping and service
components for each elementary stream (see Section 4.2.5.5).
• General Configuration
This group contains parameters that define the response of the IRD-2900 to
various operational modes (see Section 4.2.5.6).
Scopus Documents (p/n 100793) Page 4-75