IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

User Manual
Operation and Management
4.2.11.4. Serial Control Port Configuration
The Serial Control Port menu allows the user setting the serial control port
parameters.
To access the Serial Control Port Menu in the front panel control interface go to
Configuration����Unit���� Serial Control Port.
The following screen displays the Serial Control Port menu:
Serial Serial Control Control Port Port
1-2-8-2 2
1 HW HW Interface Interface
RS232
RS232
2 SW SW Protocol Protocol
TERMINAL TERMINAL ECHO ECHO
ECHO
3 Baud Baud Rate Rate
115200 115200 [Baud] [Baud]
[Baud]
4 Address Address
FFFF
FFFF
Figure 4-46 shows the corresponding Unit Serial web management screen.
Figure 4-46: Unit Serial Screen
The following paragraphs detail the Unit Serial Control Port configuration
options.
Page 4-154 (Rev. 4.6/ SW v1.80/ December 2007)