IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

User Manual
Operation and Management
WSS (WIDE-SCREEN SIGNALLING) PARAMETER
Selecting Wide-Screen Signaling (WSS) displays the following screen:
WSS WSS WSS
1-2-4-2-6
1 Source Source
E.S E.S (EN (EN-301 (EN 301 301-775)
301 775)
2 2 Line1 Line1
23
Selecting Source displays the following screen:
Source
Source
1���� DISABLE
DISABLE
2���� TV TV TV MONITOR MONITOR
MONITOR
3���� E.S E.S (EN (EN-301 (EN 301 301-775)
301 775)
4���� VIDEO VIDEO
VIDEO
The available options are:
• DISABLE – The IRD-2900 does not output a WSS signal.
• TV MONITOR – The IRD-2900 generates the WSS signal according to the
NOTE
Aspect Ratio value entered by the operator through
Root����Configuration����Video(1..2)����Monitor Aspect-Ratio (complies
with ITU-T standard J. 63).
The option TV MONITOR should not be selected along with choosing VIDEO
Source under Configuration����Video����Video 1 / 2����Monitor Aspect Ratio,
since the two A/R may contradict each other and cause unexpected results.
• E.S. (EN-301-775) – The IRD-2900 generates the WSS signal according to
the WSS information taken from the VBI Elementary Stream (complies with
DVB EN 301-775 WSS standard).
• VIDEO – The IRD-2900 generates the WSS signal according to the WSS
NOTE
information taken from the Video Header in the Video Elementary Stream.
See Appendix C for extensive details on how WSS configuration affects the
resulting image.
Page 4-108 (Rev. 4.6/ SW v1.80/ December 2007)