IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
The available options are:
• Auto. Call 1st Active – The IRD-2900 locks-onto the first active service
detected in the transport-stream. This mode is recommended for DSNG and
other applications that frequently change the decoded program.
NOTE
When Auto call first active mode is selected, the IRD-2900 might switch to the
first detected program when the TS is interrupted for any reason.
• Wait for User Select – The IRD-2900 searches for a specific (user-defined)
service to lock-on to. the IRD-2900 is tuned to decode the selected program,
even if it does not exist in the TS. This mode is recommended for broadcast
applications where the decoded program is fixed, and seldom changes.
SERVICE CAS OPEN
This parameter defines which ES will be decrypted by the CAM. It is possible to
either instruct the IRD-2900 to decrypt all the received ES, or allow it to decrypt
only the ones that are currently being decoded.
Service Service CAS CAS Open
Open
1���� DECODED DECODED PID’S
PID’S
2���� ALL ALL PMT PMT PMT PID’S
PID’S
The available options are:
• DECODED PID’S – the CAM descrambles only the PIDs that are currently
decoded by the IRD-2900
• ALL PMT PID’S - the CAM descrambles all the received PIDs
Scopus Documents (p/n 100793) Page 4-91