IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

4.2.11.7. Dry Contact Menu
User Manual
Operation and Management
The Dry Contact menu screen allows configuring the GPI 1 or GPI 2. The GPI
(General Purpose Interface) is a dry contact relay, used by the IRD-2900 for
displaying warnings that appear in the device.
To access the Dry Contact through the front panel, go to:
Root����Configuration����Unit����Dry Contact.
The following figure illustrates the Dry Contact menu:
1 GPI GPI 1
1
2 GPI GPI 2
2
Dry Dry Dry Contact Contact
1-2-8-5 5
The GPI 1 and GPI 2 configuration menus are identical.
The following is the GPI 1 Edit Menu screen:
GPI GPI 1 1
1-2-8-5-1 1
1 Delay Delay
000.0[sec]
000.0[sec]
2 Sync Sync Loss Loss
OFF OFF
OFF
3 HW HW Failure Failure
OFF
OFF
4 Invalid Invalid PSI PSI
OFF
OFF
TS Buffer Overflow 5 OFF
OFF
TS Error 5 OFF
OFF
Counter 5 OFF
OFF
CRC Error 5 OFF
OFF
PRC Discontinuity 5 OFF
OFF
Decoder Buffer Overflow 5 OFF
OFF
Decoder Buffer Underflow 5 OFF
OFF
Decoder Stream Error 5 OFF
OFF
Test 5 OFF
OFF
5 TS TS Buffer Buffer Overflow
Overflow
5 TS TS Error
Error
5 Continuity
ontinuity Counter
5 CRC CRC Error
Error
5 PRC PRC Discontinuity
Discontinuity
5 Decoder Decoder Buffer Buffer Overflow
Overflow
5 Decoder Decoder Buffer Buffer Underflow
Underflow
5 Decoder Decoder Stream Stream Error
Error
5 Test
Test
The following details the Dry Contact warnings:
Page 4-160 (Rev. 4.6/ SW v1.80/ December 2007)