IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

User Manual
Operation and Management
DRY CONTACT THROUGH THE WEB-INTERFACE
The dry contact in the web interface is divided to two different menus:
• Alarms – Allows enabling and disabling the alarms.
• GPI – Allows setting the GPI delay time and tests.
To access the Dry Contact (Alarms) configurations though the web-interface, go
to: Unit����Alarms. Figure 4-49 displays the Alarms web-interface screen:
Figure 4-49: Alarms Web-Interface Screen
GPI1, GPI2, and the SNMP alarm can be enable or disable for every alarm.
However once the Alarm Mask is disable then also GPI1 and GPI2 are disabled.
Page 4-166 (Rev. 4.6/ SW v1.80/ December 2007)