IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

User Manual
Operation and Management
To access the Data Configuration Menu in the front panel control interface go to
Configuration����Data.
All the IRD-2900 models except IRD-2960 and IRD-2990 support the IP Out-Port
option. Following is the corresponding front-panel screen:
Data Data
1 Low Low Speed Speed Data Data Data Port Port
Port
2 IP IP Out Out Port
Port
1-2-6 6
The IRD-2960 and IRD-2990 models support the High Speed Data Port option
(and not IP Out-Port). Following is the corresponding front-panel screen for
these models:
Data Data Data
1 Low Low Speed Speed Data Data Data Port Port
Port
2 High High Speed Speed Data Data Port
Port
1-2-6 6
The Data Configuration Menu parameters are:
• Low Speed Data Port
Sets the type of data to be outputted through the Low Speed Data port. The
IRD-2900 supports LS data output in three levels of filtering. For details see
Section 4.2.8.1.
• IP Out Port
Sets the IRD-2900 IP Out port parameters (e.g. the chosen transfer
protocol, the IRD-2900 IP address, UDP port and so on.). For detailed
information, see Section 4.2.8.2.
• High Speed Data Port (IRD-2960 and IRD-2990 only)
Sets the transfer rate & direction, and the type of data to be sent, through
the High Speed Data port. For details see Section 4.2.8.3.
Page 4-128 (Rev. 4.6/ SW v1.80/ December 2007)