IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
The 'Refresh' button is located at the bottom of each screen and available at all
times. Clicking this button refreshes the web-page. This is useful for updating
changes that were configured in the front-panel.
Figure 3-12: Refresh Button
3.2.2. Initializing the Web-Based
Management
Setting the management connection through the front panel involves the
following procedures:
• Set the IP Address
• Set the Subnet Mask
• Set the Default Gateway
NOTE
In order to avoid any errors and faults, Scopus recommends all Ethernet
configurations to be preformed through the front-panel or the RS323 only
A. To set the IP Address:
1. Access the IP Address edit screen. To access the screen, from the Root
menu select Configuration����Unit����Ethernet Management port����IP
Address.
2. Enter a valid IP Address.
3. Verify that the entered IP address is not allocated to any other device.
B. To set the Subnet Mask:
1. Access the Subnet Mask edit screen. To access the screen, from the Root
menu select Configuration����Unit����Ethernet Management port����Subnet
Mask.
2. Enter a valid subnet mask.
C. To set the Default Gateway:
1. Access the Default Gateway edit screen. To access the screen, from the Root
menu select Configuration����Unit����Ethernet Management port����Default
Gateway
2. Enter a valid Default Gateway.
Scopus Documents (p/n 100793) Page 3-17