IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

NOTE
All displayed frequencies are in L-Band.
4.3.1.3. IP Receiver Status
User Manual
Operation and Management
The IP Receiver status menu enables monitoring the main IP receiver
parameters. It displays both static information (such as MPEGoIP port MAC
Address) and live data (e.g. type of data encapsulation received, current bit
rate, whether or not IP parameters are valid, etc.).
To access the IP Receiver status menu in the front panel interface go to
Status����Receiver
The IP Receiver status menu as displayed on the IRD-2900 front panel screen:
Receiver Receiver
1 MPEGoIP MPEGoIP MPEGoIP Input Input 11
1
2 MPEGoIP MPEGoIP MPEGoIP Input Input 22
2
3 General General
General
1-3-1
Figure 4-58displays the corresponding Web management screen.
Figure 4-58: IRD-2900 DVB IP Status Screen
The available options are:
• MPEGoIP Input 1 – for monitoring receiver data arriving through the
MPEGoIP IN1 interface
• MPEGoIP Input 2 - for monitoring receiver data arriving through the
MPEGoIP IN2 interface
• General – for viewing general parameters values, such as software and
hardware version number, IP configuration consistency, type of detected
encapsulation, bit-rate of currently received data, etc.
The following paragraphs detail the IP Receiver Status sub menus.
Page 4-176 (Rev. 4.6/ SW v1.80/ December 2007)