IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IP OUTPUT SOURCE
User Manual
Operation and Management
The IP Output Source parameter defines the type of IP output source.
IP IP Output Output Source
Source
1���� NO NO NO FILTERING
FILTERING
2���� AFTER AFTER FILTERING
FILTERING
3���� DISABLED
DISABLED
DISABLED
The available options are:
• DECODER SOURCE – Input stream is directly routed to the ASI output
• AFTER DECRYPTION – Stream passes the CAM and then is directed to the
ASI output
• AFTER FILTERING – Stream passes the CAM and then is directed to the
ASI output
4.2.3.3. Clock
• DISABLED – ASI output signal is disabled
Defines the synchronization source for the IRD-2900.
Clock Clock
Clock
1 27MHz Synchronization
27 MHZ SYNCHRONIZATION
The 27 MHz Synchronization configuration option defines the synchronization
source for the IRD-2900 VCXO.
The Decoder Synchronization Source is a 27 MHz clock, generated by a Voltage
Controlled Crystal Oscillator (VCXO). It is used to synchronize the IRD-2900 to
the MPEG stream.
27MHz 27MHz Synchronization
Synchronization
1���� STREM STREM PPCR
P CR
2���� FIXED FIXED VALUE
VALUE
3���� GENLOCK
GENLOCK
4���� GENLOCK GENLOCK (LipSync)
(LipSync)
Page 4-60 (Rev. 4.6/ SW v1.80/ December 2007)