IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
4.3.4.1. Video 1 (and Video 2)
The Video 1 Menus (and Video 2 in dual decoder IRDs) display video parameter
Statuses.
To access the Video 1 menu in the front panel control interface go to
Status����Video����Video 1.
The following screen displays the Video 1 menu:
Video Video 1 1
1-3-4-1 1
1 Standard Standard Format Format
625 625 [Ln]
[Ln]
2 Frame Frame Rate Rate
25 25 [Hz]
[Hz]
3 Chroma Chroma Chroma Format Format
4:2:0
4:2:0
4 Resolution Resolution
H:720 H:720 * * V:608
V:608
5 Aspect Aspect Ratio Ratio
4:3
4:3
6 Field Field Sequence Sequence
NORMAL NORMAL
NORMAL
7 Picture Picture Picture Coding Coding Coding Type Type Type
P-B
8 Bit Bit Bit Rat Rate Rat
11080800 11080800 11080800 [Bps]e [Bps]e
[Bps]e
9 VBV VBV Buffer Buffer Size Size
04 04096000 04 096000 [Bit] [Bit]
[Bit]
10 Decoding Decoding Decoding Errors Errors
000000
000000
NOTE
The "Decoding Errors" parameter indicates the video stream health.
The available information is:
• Standard Format – Indicates the number of lines in the incoming video.
In this example, 625 lines indicate PAL video format.
• Frame Rate – Displays the frame rate of the incoming video stream
• Chroma Format – Displays the Chroma format currently used for the
incoming video stream
• Resolution – Displays the horizontal and vertical video resolutions for
the incoming video stream (for example, the number of pixels per
horizontal and vertical screen lines)
• Aspect Ratio – Displays the aspect ratio for the incoming video stream
• Field Sequence – Displays the type of field sequence found in the
decoded service. There are two available values: Normal, and 3:2
Pulldown
Scopus Documents (p/n 100793) Page 4-183