IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

4.2.2.5. IP Receiver Configuration Menu
User Manual
Operation and Management
This section details the front panel menus that enable configuring the IP receiver
in an IRD-2900 IP front end device.
The following is the IP Receiver configuration menu as it is displayed on the IRD-
2900 front panel screen:
Receiver Receiver
1 MPEGoIP MPEGoIP MPEGoIP Input Input 11
1
2 MPEGoIP MPEGoIP Input Input Input 2
2
3 3 General
General
1-2-1
The available options are:
• MPEGoIP Input 1 - allows the user to configure the MPEGoIP receiver
connected to the rear panel MPEGoIP IN 1 interface
• MPEGoIP Input 2- allows the user to configure the MPEGoIP receiver
connected to the rear panel MPEGoIP IN 2 interface
• General - allows the user to confugure parameters such as redundancy, De-
jittering delay, and FEC.
MPEGOIP INPUT 1
The MPEGo-IP Input 1 sub-menu allows the user to configure the MPEGoIP
receiver connected to the rear panel MPEGoIP interface.
NOTE
MPEGoIP Input 2 menu is identical to the MPEGoIP Input 1 menu
MPEGoIP MPEGoIP Input Input 1 1
1 Physical Link
2 Logical Source
3 FEC
FEC
1-2-1-1
Page 4-44 (Rev. 4.6/ SW v1.80/ December 2007)