IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
Chapter 4.
OPERATION AND MANAGEMENT
This chapter details controlling the IRD-2900 with its front panel and Web
management interfaces.
4.1. PRESET
The Front Panel control interface contains all the existing IRD-2900 control
parameters, while the Web management interface allows easy access to the
same parameters from a remote computer. Therefore the description of these
two interfaces is interlaced and brought together in this chapter.
The IRD-2900 allows creating, storing and managing up to 50 different
user-defined setups. Each setup stores the following parameters:
• Front-End - (Satellite, IP, ATM, ASI) all parameters.
• Service (Dual for 299x or Single 298x-296x) selected parameters.
• Audio- - Decode mode and Volume parameters.
• CAS - BISS keys (mode and keys).
NOTE
The IRD-2900 configuration includes all parameters detailed in section 4.2,
however, a Setup includes only the parameters mention above.
The setups are configurable through the front panel, web-interface CLI and
SNMP.
To access the Preset menu through the front panel, go to Root����Preset.
The following figure shows the front panel Preset menu:
Preset Preset Preset
1-1
1 Recall Recall
Recall
2 Save Save Current
Current
3 Rename
Rename
4 Delete
Delete
5 Delete Delete All All
OFF
OFF
Scopus Documents (p/n 100793) Page 4-1