IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
1.5.4.4. IRD-2963 Interfaces and Features
The IRD-2963 is a single 4:2:0 decoder. The entire IRD-296X family consists of
two composite video interfaces. The CVBS #1 connector is used for broadcast
quality video and the CVBS #2 connector is used for monitoring.
Figure 1-10 illustrates the IRD-2963 rear panel. The IRD-2963 basic features
and software-licensed features are described below.
Figure 1-10: IRD-2963 Rear Panel
Basic Features
• 1 composite video - Broadcast
quality (upper connector)
• 1 composite video - Monitoring
quality (lower connector)
• 2 SDI interfaces
• Embedded VBI and up to 2 stereo
channels in SDI
• 2 active analog-audio-stereo
balanced interfaces
• 2 active AES/EBU-SPDIF audio-
balanced interfaces
• SNMP management (10/100 Base-T)
• Web-based management (10/100
• GPI
Base-T)
• Front panel A/V monitoring
connectors
NOTES
Software-Licensed Features
• ASI input
• Dual (identical) ASI output
• MPEG-over-IP output or IP data
output (MPE de-capsulation)
• Genlock input and loop-through
output
• Dolby Digital (AC-3) LT/RT
downmixing
• Pro MPEG FEC
• IP Dual input (link and source
redundancy
• PID and service filtering
• RS-232 low speed data output
• H.264 (Scopus-Neotion module)
• DVB-S2 Advance Modulation
(optional)
This model requires a breakout cable to connect to the AES/EBU interfaces.
In case of power failure or system shutdown, ASI OUT 1 output will become ASI
loop-through. Use ASI OUT 1 output for cascading a chain of IRD-2900
Scopus Documents (p/n 100793) Page 1-11