IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

BAUD RATE
User Manual
Operation and Management
This parameter enables electing between eight possible LS data transmission
rates. Following is the corresponding front panel screen:
BBaud
B Baud
aud Rate
Rate
1���� 1200 1200 [Baud]
[Baud]
2���� 2400 2400 [Baud]
[Baud]
3���� 4800 4800 [Baud]
[Baud]
4���� 9600 9600 [Baud]
[Baud]
5���� 19200 19200 [Baud] [Baud]
[Baud]
6���� 38400 38400 [Baud] [Baud]
[Baud]
7���� 57600 57600 57600 [Baud] [Baud]
[Baud]
8���� 115200 115200 [Baud] [Baud]
[Baud]
The available transmission rates are: 1200, 2400, 4800, 9600, 19200, 38400,
57600, and 115200 Baud.
NOTE
The LS Data transmission Baud Rate settings must comply with the
corresponding encoder data-encapsulation rate.
LAYER FILTERING
The IRD-2900 supports three levels of Low Speed Data filtering, determining the
type of data to be transmitted through the LS Data port. Following is the front
panel Layer Filtering screen:
Layer Layer Layer Filtering
Filtering
1���� DVB DVB STREAMING
STREAMING
2���� PES PES PAYLOAD
PAYLOAD
3���� T.S T.S PAYLOAD
PAYLOAD
The three levels of data filtering are:
• DVB STREAMING – For outputting only DVB Asynchronous Data Streaming
according to the EN-301-192 standard (the first 3 bytes of the
PES_data_packet are stripped)
• PES PAYLOAD – For outputting only the PES payload (the PES header is
stripped)
• T.S PAYLOAD or outputting only the transport stream payload (the TS
header and the adaptation field are stripped)
Page 4-130 (Rev. 4.6/ SW v1.80/ December 2007)