IRD-2900 Series Professional Integrated Receiver ... - TBC Integration

IRD-2900 Series
Professional Integrated Receiver Decoders
FREQUENCY RANGE
The Frequency Range menu is used for selecting the receiver’s active frequency
band. The following figure illustrates the Frequency Range screen.
Frequency Frequency Range
Range
1���� L L BAND BAND
BAND
2���� Ku Ku BAND
BAND
3���� C C BAND
BAND
Available frequency band options are:
• L BAND – selects the frequency range 0.950000 - 2.150000 GHz
• Ku BAND - selects the frequency range 3.200000 - 4.200000 GHz
• C BAND - selects the frequency range 10.700000 - 12.750000 GHz
FREQUENCY SCAN
The Frequency Band Scan menu is used for mapping all the available
transmission frequencies received by the antenna. The symbol rate during the
scan is constant and must be set according to the satellite’s symbol rate. Upon
locating a valid DVB stream, the IRD-2900 logs the located frequency and
service name and outputs the log through the RS232 port (terminal) or through
Telnet. The following figure illustrates the Frequency Scan screen.
1���� OFF
OFF
2���� ON
ON
The available options are:
Frequency Frequency Band Band Scan Scan
Scan
• OFF – band scan is disabled
• ON – starts the band scan
Scopus Documents (p/n 100793) Page 4-33