ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ATM</strong> <strong>Option</strong><br />
5.3.14 NAT rule<br />
5.3.15 NAT side<br />
Enables (YES) or disables (NO) Network Address Translation (NAT) on this PVC<br />
connection.<br />
Values: NO, YES<br />
Default: NO<br />
When the NAT enable parameter is set to YES, the following additional parameters are<br />
also available:<br />
PVC 1> NAT enable (def:NO) ? YES<br />
PVC 1> NAT rule (1-10) (def:) ?<br />
PVC 1> NAT side (def:INTERNAL) ?<br />
Console SNMP Text-based Config<br />
NAT rule atmpvcNatRule [atmpvc#] NatRule<br />
Selects the NAT rule or rules to be used to translate address information for traffic to and<br />
from this PVC connection. A rule defines the correspondence between internal IP<br />
addresses and external, globally unique NAT IP addresses. Select multiple rules by<br />
entering a comma between the rule numbers, for example: 1,3,4.<br />
Define all NAT rules with the SETUP/IP/NAT submenu. For details, refer to the chapter<br />
Network Address Translation (NAT) in the LAN Connection and IP Networks<br />
fascicle of this document series.<br />
Values: 1 - 10<br />
Default: none<br />
Console SNMP Text-based Config<br />
NAT side atmpvcNatSide [atmpvc#] NatSide<br />
Determines which address realm this PVC connection is associated with, and where NAT<br />
is carried out.<br />
• INTERNAL: NAT is carried out on the internal side of the network. Select this<br />
value if the PVC connection is to equipment on the local side (the private network).<br />
• EXTERNAL: NAT is carried out on the external side of the network. Select this<br />
value if the PVC connection is to equipment on the remote side.<br />
Values: INTERNAL, EXTERNAL<br />
Default: INTERNAL<br />
5-10 Memotec Inc.
Change language