ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ATM</strong> <strong>Option</strong><br />
5.4.17 Fwd delay<br />
5.4.18 Fwd type<br />
Console SNMP Text-based Config<br />
Fwd delay atmpvcVoiceFwdDelayms<br />
For switched or autodial activation only.<br />
Specifies the length, in milliseconds, of a pause that precedes the forwarded dial digit<br />
string. Set this parameter to a non-zero value if the remote PBX requires a delay before<br />
forwarding the telephone number to the station side. When set to 0, no pause will be made.<br />
The Forward Delay parameter also determines the length of a pause that is inserted in the<br />
extended digits string using the pause (,) character. When this character is encountered, the<br />
forwarding NetPerformer will pause for the length of time specified by Forward Delay<br />
before forwarding additional extended digits.<br />
Values: 0 - 255 ms<br />
Default: 0 ms<br />
[atmpvc#] VoiceFwd-<br />
Delay-ms<br />
Console SNMP Text-based Config<br />
Fwd type atmpvcVoiceFwdType [atmpvc#] VoiceFwdType<br />
For switched or autodial activation only.<br />
Specifies how the dial digits are sent to the remote attached equipment for forwarding to<br />
the station side of an attached PBX or CO. Select TONE or PULSE according to the<br />
requirements of the attached user equipment.<br />
NOTE: If you set the Forward Type parameter to PULSE, ensure that the dial digit<br />
string does not contain an asterisk (*) or pound sign (#). These characters cannot<br />
be generated as pulse digits.<br />
Values: TONE, PULSE<br />
Default: TONE<br />
5-30 Memotec Inc.
Change language