ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ATM</strong> <strong>Option</strong><br />
SVC 1> Negotiate MRU (def:NO) ?<br />
SVC 1> Use MRU proposed by peer (def:NO) ?<br />
SVC 1> Request Magic Number (def:YES) ?<br />
SVC 1> Accept Magic Number Request (def:YES) ?<br />
SVC 1> Accept Addresses Old Negotiation (def:NO) ?<br />
SVC 1> Request IP-Address (def:NO) ?<br />
SVC 1> Accept IP-Address Request (def:NO) ?<br />
SVC 1> Request DNS-Address (def:NO) ?<br />
SVC 1> Accept DNS-Address Request (def:NO) ?<br />
SVC 1> IP address (def:000.000.000.000) ?<br />
SVC 1> Subnet mask (number of bits) (0-32,def:8) ?<br />
{255.000.000.000}<br />
SVC 1> IP RIP (def:V1) ?<br />
SVC 1> IP RIP TX/RX (def:DUPLEX) ?<br />
SVC 1> OSPF (def:DISABLE) ?<br />
SVC 1> IP multicast active (def:NO) ?<br />
SVC 1> NAT enable (def:NO) ?<br />
SVC 1> Filter (def:ALL) ?<br />
• Mode, SVC Destination address, Local Address, Type, Call Delay, Call Retry<br />
Delay and Peak cell rate (PCR) are described in “<strong>ATM</strong>PVCR Mode” on page 6-3<br />
• The other parameters are typical of a PPP logical connection, and are fully<br />
described in the appendix “SE/PVC Configuration Parameters” on page 5-1.<br />
Consult the section “<strong>ATM</strong>PPP Mode” on page 5-38 under the equivalent parameter<br />
name.<br />
2-32 Memotec Inc.
Change language