ATM Option System Reference - Comtech EF Data

ATM Option
2.7.3 PVC in FRF.8 Mode
FRF.8 mode provides a Service Interworking method using FRF.8, and is used for Frame
Relay traffic. See the section “Frame Relay/ATM Service Interworking (FRF.8)” on
page 1-18 for further information.
SE/PVC/FRF.8
example PVCATM2>SE
SETUP
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/
PHONE/
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/SVC/USER/VLAN,
def:BRIDGE) ? PVC
PVC number (1-300,def:1) ? 4
PVC 4> Mode (def:PVCR) ? FRF.8
PVC 4> VPI address (0-255,def:0) ? 1
PVC 4> VCI address (0-65534,def:0) ? 103
PVC 4> Peak cell rate (0-3622,def:1000) ?
PVC 4> Payload information rate is 384000 bps
PVC 4> Total information rate is 424000 bps
PVC 4> Port (def:1) ?
PVC 4> DLCI address (0-1022,def:0) ?
PVC 4> Committed Information rate (4000-2048000,def:56000) ?
PVC 4> Burst Information rate (4000-2048000,def:56000) ?
PVC 4> Header translation (def:YES) ?
PVC 4> ATM CLP bit (def:DE) ?
PVC 4> ATM EFCI bit (def:FECN) ?
PVC 4> Frame relay DE bit (def:CLP) ?
PVC 4> Frame relay FECN bit (def:EFCI) ?
PVC 4> Congestion queue size (0-100000,def:4000) ?
PVC 4> Maximum queue size (0-100000,def:8000) ?
2.7.4 PVC in RFC1483 Mode
• VPI address, VCI address, Peak cell rate, Payload information rate and Total
information rate are described in “ATMPVCR Mode” on page 5-4
• The other parameters are particular to a PVC in FRF.8 mode. For details, turn to
“FRF.8 Mode” on page 5-31.
RFC1483 mode provides a data traffic transport method using multiprotocol over ATM
AAL5 (RFC-1483). See the section “LLC Encapsulation (RFC-1483)” on page 1-22 for
further information.
• Use this mode for LAN traffic
• It can also provide a link to a legacy ATM application, a gateway controller or
network management system, as well as Internet access.
2-22 Memotec Inc.