ATM Option System Reference - Comtech EF Data

5.3.34 Broadcast group
SE/PVC Configuration Parameters
When selecting more than one filter, separate each filter number with commas,
for example:
PVC 1> Filter (def:ALL) ? 2,21,10
The filters you select are applied to the port traffic in the order you specify for
this parameter. In the above example, Filter 21 will be applied before Filter 10.
Values: An automatically generated list of filter numbers
Default: ALL
Console SNMP Text-based Config
Broadcast group atmpvcBroadcastGroup [atmpvc#] Broadcast-
Group
This parameter determines whether the PVCR PVC is a member of a broadcast group. A
broadcast group must be defined for voice broadcasting to multiple remote sites. Refer to
the Analog Voice fascicle of this document series.
NOTE: The Broadcast Group parameter is available only on NetPerformer models
that support voice/fax transmissions.
Set Broadcast Group to YES to define the PVC as a member of a broadcast group. The
PVC will be used to receive broadcast frames from the Frame Relay one-way multicast
server. All PVCR PVCs that must be able to receive broadcast frames on the leaf side of
the connection should be configured with Broadcast Group = YES.
Set Broadcast Group to NO (the default value) when the PVCR PVC is not a member of a
broadcast group. This is the correct setting for the PVCs on the root NetPerformer that
transmit the broadcast frames, and for all PVCR PVCs that are not used for voice
broadcasting.
Values: NO, YES
Default: NO
5.3.35 Maximum number of voice channels
Console SNMP Text-based Config
Maximum number of
voice channels
atmpvcMaxChannels [atmpvc#] MaxChannels
Maximum number of incoming and outgoing channels permitted on this PVC or any other
connection serving the destination specified by the Remote Unit Name for this PVC.
Another connection may be a PVCR, FR-USER or FR-NET port, or a PVCR, FP or FP
Memotec Inc. 5-19