ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ATM</strong> <strong>Option</strong><br />
6.3.4 SVC Local E.164 Address<br />
6.3.5 Type<br />
6.3.6 Call Delay<br />
SVC Local E.164<br />
Address<br />
Console SNMP Text-based Config<br />
atmsvcLocalAddrE164 [atmsvc#] LocalAddrE164<br />
Required only if the associated <strong>ATM</strong> channel is configured with the UNI Type<br />
set to PUBLIC.<br />
Provides the local address in E.164 format.<br />
Values: maximum 15 decimal digits<br />
Default: all zeros<br />
Console SNMP Text-based Config<br />
Type atmsvcType [atmsvc#] Type<br />
Sets the call activation type:<br />
• DEDICATED: The NetPerformer will attempt to establish the call to the destination<br />
address.<br />
• ANSWER: The NetPerformer will not initiate the call; it will wait for the remote<br />
side to place the call.<br />
NOTE: If both sides are set to DEDICATED, the Call Delay and Call Retry Delay<br />
parameters (see below) can be used to avoid constant call collisions.<br />
Values: DEDICATED, ANSWER<br />
Default: DEDICATED<br />
Console SNMP Text-based Config<br />
Call Delay atmsvcCallDelay [atmsvc#] CallDelay<br />
For DEDICATED type only.<br />
Sets the number of seconds that the NetPerformer will wait before attempting to place a<br />
call to the destination address.<br />
Values: 1 - 255<br />
Default: 5<br />
6-4 Memotec Inc.
Change language