ATM Option System Reference - Comtech EF Data

6.3 ATMPVCR Mode
6.3.1 SVC Destination address
6.3.2 SVC Local Address
SE/SVC Configuration Parameters
NOTE: Many of the parameters detailed in this section are also listed when the PVC
is configured to another mode.
Required only if the associated ATM channel is configured with the UNI Type
set to PRIVATE.
Indicates the destination address in AESA format.
Required only if the associated ATM channel is configured with the UNI Type
set to PRIVATE.
Provides the AESA user part (low-order ESI and SEL fields). This address is concatenated
with the prefix of the ATM switch to form the full AESA address.
6.3.3 SVC Destination E.164 Address
Console SNMP Text-based Config
SVC Destination address atmsvcDestAddr [atmsvc#] DestAddr
Values: 40 hexadecimal digits (20 bytes)
Default: all zeros
Console SNMP Text-based Config
SVC Local Address atmsvcLocalAddr [atmsvc#] LocalAddr
Values: 14 hexadecimal digits (7 bytes)
Default: all zeros
Console SNMP Text-based Config
SVC Destination E.164
Address
atmsvcDestAddrE164 [atmsvc#] DestAddrE164
Required only if the associated ATM channel is configured with the UNI Type
set to PUBLIC.
Indicates the destination address in E.164 format.
Values: maximum 15 decimal digits
Default: all zeros
Memotec Inc. 6-3