ATM Option System Reference - Comtech EF Data

ATM Option
SE/SLOT/#/
LINK example
SE/SLOT/#/
CHANNEL
example
Slot 1 Configuration
NOTE: This configuration is also required for deployment of the NetPerformer as an
ATM multiplexer.
9230-1>SE
SETUP
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/
PHONE/
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/SVC/USER/VLAN,
def:BRIDGE) ? SLOT
SLOT> Slot number (1/2,def:1) ? 1
Item (LINK/CHANNEL,def:LINK) ? LINK
PORT 100> Status (def:DISABLE) ? ENABLE
PORT 100> Clock recovery (def:ENABLE) ?
GLOBAL > Digital port clock source (def:1) ? 1
PORT 100> Signaling mode (def:NONE) ? NONE
PORT 100> Pcm encoding law (def:MU-LAW) ?
PORT 100> Hunt Group Sorting (def:RRA) ?
PORT 100> Idle code (def:7F) ?
PORT 100> Zero suppression mode (def:B8ZS) ?
PORT 100> Gain limit (def:-30DB) ?
PORT 100> Framing mode (def:ESF) ?
PORT 100> Line Build Out (def:0-133FT) ?
PORT 100> Loopback (def:DISABLE) ?
9230-1>SE
SETUP
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/
PHONE/
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/SVC/USER/VLAN,
def:SLOT) ?
SLOT> Slot number (1/2,def:1) ?
Item (LINK/CHANNEL,def:LINK) ? CHANNEL
SLOT> Channel Number (101-124/ALL,def:101) ?
PORT 101> Protocol (def:OFF) ? ATM
PORT 101> Timeslot (def:1) ?
PORT 101> Number of consecutive timeslots (1-24,def:1) ? 24
PORT 101> Idle cell (def:ITU-T) ?
PORT 101> Idle cell payload (def:6A6A6A6A) ?
PORT 101> HEC coset function (def:ENABLE) ?
PORT 101> Scrambling function (def:DISABLE) ?
PORT 101> UNI Version (def:NONE) ?
PORT 101> UNI Type (def:PRIVATE) ?
PORT 101> ATM Signaling Channel VPI (0-255,def:0) ?
PORT 101> ATM Signaling Channel VCI (0-65535,def:5) ?
PORT 101> ILMI Channel VPI (0-255,def:0) ?
PORT 101> ILMI Channel VCI (0-65535,def:16) ?
2-34 Memotec Inc.