ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
ATM Option System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ATM</strong> <strong>Option</strong><br />
4.6 UNI Type<br />
Console SNMP Text-based Config<br />
UNI Type ifwanAtmUniType [ifwan#] AtmUniType<br />
Indicates the type of network that this digital interface is connected to:<br />
• PRIVATE: The interface is connected to a private network. This implies that<br />
AESA address format will be used in the SVC configuration.<br />
• PUBLIC: The interface is connected to a public network. This implies that E.164<br />
address format will be used in the SVC configuration.<br />
NOTE: No address registration is done if UNI Type is PUBLIC.<br />
Refer to “<strong>ATM</strong> Addressing” on page 1-9 for further information.<br />
Values: PRIVATE, PUBLIC<br />
Default: PRIVATE<br />
4.7 <strong>ATM</strong> Signaling Channel VPI<br />
Console SNMP Text-based Config<br />
<strong>ATM</strong> Signaling Channel<br />
VPI<br />
ifwanAtmSigVpi [ifwan#] AtmSigVpi<br />
Determines the address of the Virtual Path Identifier (VPI) for the <strong>ATM</strong> signaling channel.<br />
Refer to “UNI Signaling” on page 1-7.<br />
NOTE: The zero (0) default value selects VPI 0.<br />
Values: SDM-9360, SDM-9380, 0 - 63<br />
SDM-9585:<br />
SDM-9230: 0 - 255<br />
Default: 0<br />
4-4 Memotec Inc.