Fravol Smart Series Edgebander Manual & Parts List

More documents

Recommendations

Info

USER’S MANUAL AND MAINTENANCE ACCESSORY 08: END-TRIMMING Rpm blade rotation speed; power 0.50 KW 12000 r.p.m. Outside diameter of Standard blade 100 Inside blade diameter 20 Blade width H 3.2 Number of teeth of the blade Z 16 Blade inclination 0°-15° ACCESSORY 09: MULTIPURPOSE ROUGHING UNIT Cutter rotation speed power 0.5 KW 12000 r.p.m. Outside diameter of the cutter 77 Inside diameter of the cutter 20 Cutter width H 16 Number of teeth of the cutter Z 4 Cutter inclination 0º not adjustable (23°-30°) ACCESSORY 11: BUFFING UNIT Buffer rotation speed power 0.37KW 1400 r.p.m. Measure of cotton buffers (n. 4) 120x50x12.5 ACCESSORY 13: PHON BLOWERS Adjustable temperature 0°>600° Power for each 2000 W Air exit tuyere 60x8 01.8 SAFETY RULES GENERAL SAFETY MEASURES Hereunder is a series of safety instructions and precautions that FRAVOL recommends to machine users; the the aim is to inform operators as to to the possible dangers dangers of machine use. • It is fundamental for safety to read the instruction manual fully and carefully, applying all the recommendations and instructions for safety that it contains. • use the machine only according to its proper use. • follow the instructions for safety on the machine and indicated in this manual. • do not make any alterations (of a mechanical or electrical nature) on the machine without the authorization of the manufacturer. The guards and safety spaces used are based on the following premises: • the guards and any of their openings will keep their shape and position; • persons will not make any attempt to extend parts of the body beyond the guards or through the openings in order to reach the hazardous zone; Rev 1–03/07 7
USER’S MANUAL AND MAINTENANCE • the reference surface is at floor level and working platforms are not used; • no means such as chairs or ladders will be used to change the reference surface; • no means such as bars or tools will be used to increase the natural accessibility of the hands and arms. The production manager is responsible for the respect of the safety norms listed below: When using and when in contact with thermofusing glue you may risk to get burnt and suffer permanent damages. It’s compulsory to use klevelard or other types of gloves. Do not put your hands or anything else either into the moving parts, parts in tension or in the electric component box. Use only panels and edges suitable for the machine capacity (parag. 01.6). Use only tools with the same characteristics of those installed (parag. 01.6). Make sure that they all work at the same maximum speed, that they are sharp balanced and well fastened. It is forbidden to disassemble the adjustment devices of the protection boxes containing gas under pressure. If the machine is used in line with others you need the builder or one if his technician’s intervention to put the necessary interblocks between the machines and for emergency start-up. The building firm refuses al responsibility for the non-observance of the safety and prevention rules described below. It also refuses all responsibility for damages caused by the misuse of the edge bander or by unauthorized modifications. Please pay particular attention to this symbol whenever it occurs in the manual: it indicates a possible dangerous situation. There are three levels of danger: DANGER: It is the sign of maximum danger and warns that if the operations described aren’t correctly carried out, they will CAUSE grave lesions, death or risks with long-term consequences for your health. ATTENTION: This sign warns that if the operations described aren’t correctly carried out, they COULD cause grave lesions, death or risks with long-term consequences for your health. The sign ATTENTION indicates a level of risk lower than that of DANGER. Rev 1–03/07 8
Page 1 and 2: INDEX CHAPTER 01 I INTRODUCTION 1.1
Page 3 and 4: ACCESSORY 21 ROUNDING UNIT USER’S
Page 5 and 6: USER’S MANUAL AND MAINTENANCE Rev
Page 7 and 8: 13) ACCESSORY 18 USER’S MANUAL AN
Page 9: 1.6 OVERALL DIMENSIONS 1.7 TECHNICA
Page 13 and 14: USER’S MANUAL AND MAINTENANCE SAF
Page 15 and 16: APPAREL: USER’S MANUAL AND MAINTE
Page 17 and 18: SAFE MAINTENANCE: USER’S MANUAL A
Page 19 and 20: DANGER: USER’S MANUAL AND MAINTEN
Page 21 and 22: 02.4 CONNECTION OF THE ELECTRIC SYS
Page 23 and 24: USER’S MANUAL AND MAINTENANCE Pic
Page 25 and 26: USER’S MANUAL AND MAINTENANCE Mak
Page 27 and 28: LED DESCRIPTION USER’S MANUAL AND
Page 29 and 30: 03 USAGE 03.1 USAGE TIPS USER’S M
Page 31 and 32: 03.3 FUNCTIONNING (AUTOMATIC) FOR S
Page 33 and 34: ATTENTION: USER’S MANUAL AND MAIN
Page 35 and 36: 6 36 64 7 34 23+24 8 36 6 9 34 7 10
Page 37 and 38: 4.3 LUBRICATOR TABLE USER’S MANUA
Page 39 and 40: USER’S MANUAL AND MAINTENANCE Sel
Page 41 and 42: USER’S MANUAL AND MAINTENANCE You
Page 43 and 44: strips will automatically find thei
Page 45 and 46: A03. 07 HELPFUL TIPS USER’S MANUA
Page 47 and 48: A06. 02 PNEUMATIC ADJUSTMENTS USER
Page 49 and 50: USER’S MANUAL AND MAINTENANCE Pne
Page 51 and 52: A07. 02 ADJUSTMENTS Reference to pi
Page 53 and 54: USER’S MANUAL AND MAINTENANCE A08
Page 55 and 56: USER’S MANUAL AND MAINTENANCE The
Page 57 and 58: USER’S MANUAL AND MAINTENANCE Cha
Page 59 and 60: USER’S MANUAL AND MAINTENANCE To
Page 61 and 62:
USER’S MANUAL AND MAINTENANCE A09
Page 63 and 64:
Page 65 and 66:
USER’S MANUAL AND MAINTENANCE The
Page 67 and 68:
USER’S MANUAL AND MAINTENANCE If
Page 69 and 70:
A10 SCRAPER UNIT ACCESSORY N. 10 A1
Page 71 and 72:
USER’S MANUAL AND MAINTENANCE 1 L
Page 73 and 74:
A11. 02 ADJUSTMENT USER’S MANUAL
Page 75 and 76:
A13 BLOWING UNIT ACCESSORY N. 13 US
Page 77 and 78:
A21 ROUNDING UNIT ACCESSORY N° 19
Page 79 and 80:
USER’S MANUAL AND MAINTENANCE the
Page 81 and 82:
USER’S MANUAL AND MAINTENANCE THE
Page 83 and 84:
Page 85 and 86:
USER’S MANUAL AND MAINTENANCE Sol
Page 87 and 88:
USER’S MANUAL AND MAINTENANCE Def
Page 89 and 90:
Page 91 and 92:
USER’S MANUAL AND MAINTENANCE Do
Page 93 and 94:
A16. 02 LUBRICATOR ADJUSTMENTS USER
Page 95 and 96:
CAUTION: USER’S MANUAL AND MAINTE
Page 98 and 99:
Questo catalogo riporta informazion
Page 100 and 101:
Catalogo ricambi Spare parts catalo
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204:
show all

Fravol Smart Series Edgebander Manual & Parts List

Create successful ePaper yourself

Delete template?

Save as template?